Ctrlk
For the complete documentation index, see llms.txt. This page is also available as Markdown.

KM Box Net Setup

1

Connect the KM Box

  • Port #1 → Connect to your second PC using the included USB cable.

  • Port #2 → Connect to your main PC using the included USB cable.

  • Port #3 or #4 → Connect your keyboard or mouse (either port works).

2

Configure Network Settings

  1. Open Control Panel and go to Network and Internet.\

  2. Click Network and Sharing Center.

  3. Click Change adapter settings.

  4. Locate the KM Box network adapter.

    • If it’s not showing, unplug and replug the KM Box.

  5. Right-click the adapter and select Properties.

  6. Select Internet Protocol Version 4 (TCP/IPv4) and make sure it’s enabled.

  7. Click Properties.

3

Assign a Static IP Address

  • Select Use the following IP address and enter:

    • IP Address: 192.168.2.100

    • Subnet Mask: 255.255.255.0

4

Save & Finish

  • Close all dialog boxes.

  • Your KM Box is now ready to use.

✅ You're Done

Your KM Box Net is now setup and ready to use!

PreviousDC505 Capture Card
NextKM Box B+ Setup

Last updated