For the complete documentation index, see llms.txt. This page is also available as Markdown.

Valorant Vanuri Pro


1

Download the Loader

Download Loader

2

Windows

  1. Install all Windows Updates

  2. Disable Anti-Virus with DefenderControl Download, extract and run it (Password : sordum)

  3. Disable HDR

  4. Windows Zoom (Scaling): 100

  5. Disable the iGPU in Device-Manager if you have one

  6. For Laptop Users: Turn on "use dedicated GPU only" mode aka MUX switch. This is usually done in the software from the laptop manufacturer itself.

3

Game

  1. Set video mode to "Fullscreen"

  2. Don't use a white crosshair

  3. Cap FPS to your average FPS you get in game -20%

  4. Turn on "Always Show Inventory" (Settings > General > Others)

4

Loader

  1. Download VanuriClient from the Website

  2. Log in with your Vanuri username and password

  3. A System Check window will appear, install / do all of the required checks

  4. Restart PC

5

Input Device: Raspberry Pi (1PC or 2PC)

Prepare Micro SD Card

  1. Start Loader and log in with your username and password and select your product

  2. The first setup assistance starts, follow it’s instructions (Supported micro SD-Card sizes: 8, 16, 32, 64 & 128GB)

  3. Once it flashed your micro SD-Card successfully, you can put your micro SD-Card into the Raspberry Pi.

Raspberry Pi Cooling Cool your Raspberry Pi actively:

Raspberry Pi connection

  1. Connect Raspberry Pi with an ethernet cable to your Router or Switch

  2. Connect the USB-C to USB-C/ USB A cable from your Raspberry Pi to your Gaming PC (use a USB-C/ USB 3 port at the back of your computer, don't use front ports)

  1. Wait 2 minutes for the Raspberry Pi to start

  2. Click on "Find Hardware", VanuriClient will find your Raspberry Pi and apply flashes

6

Input Device: MAKCU (2PC)

Prepare MAKCU

1. Download the MAKCU Files from MCU 2 Extract the contents 3. Open 1. driver and run the CH343SER.EXE and install the driver

Setup MAKCU

1. Open 2. setup MAKCU and start MAKCU.exe2. Hold the left button on the MAKCU and then plug in a USB Cable on the very left port

3. MAKCU Software will detect the device and show that it is in flash mode. Click on USB1 Flash

4. Remove all Cables from the MAKCU5. Hold the right button on the MAKCU and then plug in a USB Cable on the very right port

6. MAKCU Software will detect the device and show that it is in flash mode. Click on USB3 Flash

7

Dual PC (Skip if you use 1PC)

  1. Gaming PC: Install Sunshine

  2. Gaming PC: Configure sunshine (set your own password) @ https://localhost:47990/

Configure -> Input -> Disable Gamepad Input, Keyboard Input, Mouse Input SAVE and APPLY!

  1. Cheat PC: Download Moonlight

  2. Cheat PC & Gaming PC: Moonlight should auto find your gaming pc, click it and register moonlight to sunshine client

  3. Cheat PC: Click settings in the top right

  • Resolution/FPS should match your native display

  • Bitrate = 25

  • "Fullscreen Windowed" mode

  • VSync off

  • Uncheck 'mute host PC speakers while streaming'

8

Cheat Usage

  1. Clicking on the START/STOP button at the top starts and stops the cheat

  2. Disable Team check in shooting range

  3. Recoil: Find a good recoil value (Recoil is only active when shooting a Player/ Bot)

  4. Aimbot speed: the higher the faster

  5. Weapon detection only works when the weapon inventory (bottom right) is constantly visible. Currently there is a game bug which disables the weapon inventory after some time

9

Troubleshooting

  • Aimbot is shoppy and not smooth: Make sure thre Game is not consuming all of your GPU, check it by opening your Task manager on second screen (or on same screen with option "Always on Top", then check GPU usage while running around in game. It must not exceed 70%

Last updated